Shell by ARTechnic architects (壳牌的ARTechnic建筑师)

[复制链接]
查看: 2056|回复: 13
maomao 发表于 2010-1-8 23:34:56 | 显示全部楼层 |阅读模式


Japanese architects ARTechnic have completed Shell, a holiday villa in Karuizawa, Japan.



The two-storey, concrete house comprises two tubes with oval sections, arranged around a fir tree.



The floor is raised 1.4 metres from the ground; the architects intended to minimise time spent on maintaining the property by separating the house from its natural surroundings.



“Being in sync with nature isn’t about yielding to nature – it’s about coexistence,” explains Kotaro Ide of ARTechnic. “The existence of the structure depends on its power to endure nature.”


Photographs by Nacasa & Partners Inc.



Here’s some more information from ARTechnic architects:

SHELL
A large shell shaped structure finds itself in the middle of the woods. It is hard to determine what exactly the structure is, and unlike the surrounding caves and rocks, it clearly is not a part of nature – nor is it a ruin. A frame, a shape, made at a completely different place for a completely different purpose. Within this shell shaped structure will one find floors constructed, wall separating spaces, and rooms furnished. The scenery conjures a SF film-like image, in which locals inhabit over an abandoned spacecraft. With time, trees start to grow encircling the spacecraft, harmonizing it into the landscape.



Desiring a place that will be occupied frequently over many years and yet at the same time be in sync with nature, we came up with the aforementioned scenery of a large shell structure floating above ground.



Being in sync with nature isn’t about yielding to nature – it’s about coexistence. The existence of the structure depends on its power to endure nature. By isolating living space from the wilderness, and upgrading its quality as a shelter, the house will be protected from nature and will provide a comfortable environment. With this, the house will be taken care of and used frequently and continuously. Specifically in cases of villas, frequent use is what leads it to blend in with its surroundings.



The regions’ low temperatures and high humidity level makes for a harsh climate. As a result, many houses that take on traditional structures are decaying. Is it in sync with nature? Perhaps. But the whole idea of comfort seems to be put into question. Consequently, large numbers of villas have not been in use for many years bringing them down to further dilapidation. Despite the general avoidance of concrete material in the region, its usage and the lifting structure have helped the villa protect itself from the humidity.



Leaving the boundary between human life and nature ambiguous is a Japanese virtue. Yet, this ideal can only be achieved through meticulous attention and care of the wilderness on a daily basis. This might be attainable at our homes, but isn’t a practical theory when applied to villas. If a visit to the villa inevitably leads to hours and days of maintenance, why bother going? It clearly goes against the purpose of a villa. Having a type of living space that merges with nature could be appealing, but it seems natural to consider this option only when one is ready to devote a large time solely on maintenance.



It goes without saying that villas should not only be functional spaces for the weekend. Their greatest goal is to provide us with good rest, leisure, and picturesque views that never become dull – all in the vicinity of nature. In the style of many modern sculptures, we aimed to enhance the surrounding nature by incorporating it within the spatial structure.



Description of mechanical system

For the house to be actually used, we paid the ultimate attention to its comfort and performance level.

With its classic status as a summer resort, many old villas in Karuizawa take on traditional styles, from the time when visitors arrived with the intention of staying for at least a month. Little did it matter that a day or two had to be spent on maintaining the house, given the long sojourn. With the advent of the Shinkansen, the high-speed railways, Karuizawa is merely an hour and 10 minutes away from Tokyo – visiting Karuizawa just for the weekend has become a norm today. A shorter visit calls for a shorter duration of maintenance.



The central control system enables all mechanical and electrical equipments to be managed by three buttons. In addition, the biometrics lockage and security system will reduce anxiety and stress over house safety management. The installment of the custom made floor-heating system minimizes the use of heat energy for avoiding the trouble of emptying drainage in cold regions.



Furthermore, it is highly effective in mold prevention. In addition, it works as a cold-draft blocking system which enables the luxury of enjoying a hefty amount of space with large openings. The system integrates itself within the architectural form.



Assuming future interior and equipment maintenances (including the window sash) for continual use, the frame is completely separate. The building frame is assumed to assimilate with its surroundings with the passage of time. To provide efficiency during maintenance, the concrete was exposed, finished with a penetrative sealer for concretes.



Description of building composition

The plan was to build the villa around the big fir tree as the center of the site, with a row of pine trees as the main view. Initially, we had planned to build a shell structure with three dimensionally curved surfaces, and the C shaped section was to surround the fir tree and the plan of the building resembled the letter J.



In addition, certain parts were planned to hold double volume space. Yet, going over the budget, construction method and finish, the plan was revised down to a shell structure of two dimensionally curved surfaces. The J shaped structure is constructed by two different size oval cylindrical masses cut with curves.



The straight part of J, a smaller mass connects to a curved part to J, a larger mass. The top of the oval shaped building wall thickens by 350mm and its width continuously increases up to 750mm at both sides to meet the structural requirements.

 楼主| maomao 发表于 2010-1-9 08:36:26 | 显示全部楼层
00000000000000<br /><br /><br /><br /><br />
 楼主| maomao 发表于 2010-1-9 08:40:53 | 显示全部楼层
[s:81]<br /><br /><br /><br /><br />
 楼主| maomao 发表于 2010-1-9 08:49:18 | 显示全部楼层
...............<br /><br /><br /><br />
gggds 发表于 2010-1-9 13:18:14 | 显示全部楼层
The free-curved lines appear on the edge, and the three dimensionally curved surface with a twist partly appears on the cut surfaces. However the entire structure was composed by two dimensionally curved surfaces.



The floor is built 1400mm above the ground, with the lower half of the shell structure protruding greatly towards the outside, supporting the terrace of the same height.



All air and exhaust outlets are installed beneath the sash, letting air run outside through the terrace louver. In addition, by devising unfixed windows, we tried to maximize natural ventilation (we haven’t arranged air conditioning in general parts). While at a glance, the oval shaped cylinder space might appear as wasteful use of space, the functional use of space is maximized by the installation of furniture in the lower half of the oval cylinder.














Above: initial sketch of SHELL.




Above: final proposal of SHELL with three dimensionally curved surfaces.






Above: proposal of SHELL with two dimensionally curved surfaces in different variations.




Above: initial proposal of SHELL with oval cylinder shape.




Above: final proposal of SHELL with the reduced volume from previous proposal.





gggds 发表于 2010-1-9 13:19:04 | 显示全部楼层


Above: the completion images.
Project title: SHELL
Architects: Kotaro Ide / ARTechnic architects
Assistants : Moriyuki Fujihara&#12539;Ruri Mitsuyasu&#12539;Takashi Mototani (former member) Kenyu Fujii
Collaborator: ManamiIde (designer of customized metal work)
Structural engineer: Naomi Kitayama / NAO
Mechanical engineer: Hiroshi Nakayama / TNA
Electrical engineer: Jyunetsu Satou / EPS
Constructor: Kenji Kusunoki / GIKAKU
Client: Mr.Kunimoto
Location: Karuizawa, Kitasaku, Nagano
Principal use: Private villa
Structure: Reinforced concrete
Foundation: Spread foundation
Building scale:
    [li]2stories / Maximum height 6.45m [/li][li]Site area: 1711.03㎡ [/li][li]Building area: 274.38㎡ (building coverage ratio 16.04% legal max.20%) [/li][li]Total floor area: 329.65㎡ (floor area ratio 19.27% legal max.20%) [/li][li]1st floor: 267.80㎡ [/li][li]2nd floor: 61.85㎡ [/li]
Exterior finishes:
    [li]Roof and exterior walls: Exposed concrete with penetrative sealer finish [/li][li]Roof and exterior walls (entrance): Exposed concrete with penetrative sealer and heat insulating paint finish [/li][li]Openings: Steel and aluminum sash [/li][li]Terrace flooring: Ulin flooring t=20mm with penetrative paint finish [/li]
Interior finishes:
    [li]Ceiling and interior walls: Expanded hard urethane form t=60mm with synthetic resin with vermiculite material spray finish [/li][li]Ceiling and interior walls (entrance): Heat insulating paint finish [/li][li]Ceiling and interior walls (double volume space): Plastered finish [/li][li]Interior walls (a part): Teak plywood with oil finish [/li][li]Flooring: Ulin flooring t=15mm [/li][li]Flooring (entrance concrete floor): Concrete exposed-aggregate finish by washing with color paint finish [/li]
gggds 发表于 2010-1-9 13:19:31 | 显示全部楼层
我帮你搞好那些看不到的图片了呵呵,很好看
 楼主| maomao 发表于 2010-1-9 13:31:07 | 显示全部楼层
[s:59] 恩。恩。谢谢
huli32707 该用户已被删除
huli32707 发表于 2010-1-9 22:33:24 | 显示全部楼层
提示: 作者被禁止或删除 内容自动屏蔽
潘多拉 发表于 2010-9-4 03:27:28 | 显示全部楼层
很漂亮。
猫猫的头像每当看起,就会想起学堂生活!

本版积分规则

精彩图文

Copyright   ©2015-2016  展示网  Powered by©Discuz!  技术支持:凡尚展览     ( 粤ICP备14065977号 )